eQ-3 HomeMatic HMW-LGW-O-DR-GS-EU Installations- Und Bedienungsanleitung Seite 37

double insulated mains cables for the cables carrying
mains voltage.
For installation, please proceed as follows:
• Place the HomeMatic RS485 Gateway with the
spring latch onto the DIN rail from above.
• Latch the device on the DIN rail by pressing down.
Downloaded from www.Manualslib.com
The maximum lengths of all connected cables
varies depending on the type of cable used.
However, a length of 50 m must never be
exceeded.
For secure operation, the device has to be
installed in a power distribution panel accor-
ding to VDE 0603, DIN 43871 (low-voltage
sub-distribution board), DIN 18015-x. The
installation must be made on a mounting rail
(DIN rail) according to EN50022. Installation
and wiring have to be performed according to
VDE 0100 (VDE 0100-410, VDE 0100-510
etc.). The technical connection conditions of
the energy supply company have to be consi-
dered.
manuals search engine
37