Heltun HE-FT01 Schnellstartanleitung Seite 7

OVERVIEW
The HELTUN HE-FT01 Advanced Programmable Thermostat is elegantly designed and 'Impossibly
Smart' providing wireless over-the-Internet control of your home's fan coil heating/cooling system.
The HE-FT01 is 'Impossibly Thin' on the wall yet packed with features to help you save energy while
providing the ultimate in comfort and convenience.
Perfectly controls air conditioning systems
The HE-FT01 is designed to maintain constant room temperatures by using internal air temperature sensor. It controls 2-pipe or 4-pipe air
conditioning/heating systems such as: split/multi-split systems, chillers and fan coil unit systems, central air conditioning systems,
multi-zone VRF/VRV air conditioning systems, etc. The fan speed is controlled by three relay outputs. Two more relay outputs control
cooling and heating valves. The HE-FT01 has two independent inputs for relay channels which allow it to control fans and valves with
di erent power sources or to use relay outputs as dry contacts. Each relay can carry a load of up to 5 Amps.
Multiple built-in sensors
The HE-FT01 has an LCD screen, six high sensitivity capacitive touch buttons, and internal temperature sensor with compensating software
for precise temperature monitoring and control. It also has built-in humidity and illumination sensors. You can instantly access information
from all sensors on the user-friendly display.
Monitor all important information without even a touch
The at-a-glance display shows: ambient air temperature, user set point, humidity level, current operating mode, climate mode, fan speed, time,
day of the week, and status of the Z-Wave network. Display brightness adjusts to ambient light conditions automatically making it easy to read.
Highly con gurable
You can select one of four operation modes (COM, TIME, ECO, OFF) with individual set points either manually or by using a Z-Wave
controller/gateway. The HE-FT01 operates in four Climate Modes: Heating & Cooling, Heating only, Cooling only, or Ventilation and has six
fan speed control modes: Low, Medium, High, Auto Medium, Auto High, & O .
Know how much energy you use
The HE-FT01 built-in Power Consumption System monitors how much energy you used during any particular day, week, or month. Just
specify the consumption of the load in watts for each relay channel and the thermostat logic will calculate total consumption relative to
the time since the output was in the 'ON' state.
Based on the latest Z-Wave platform
The HE-FT01 integrates a Z-Wave Plus v2 700 platform module allowing it to be used with Z-Wave home automation systems. The HE-FT01
supports Z-Wave 'S0' and 'S2' security protocols, SmartStart technology, and can be connected ("associated") to other Z-Wave devices, such
as relays, switchers, etc.
5