Cleaning Instructions - Palram Palermo Gazebo 3000 Gebrauchsanweisungen

IMPORTANT
Please read
these instructions carefully before you start to assemble this product.
Please carry
out the
steps
in
the order set
out
in
these instructions.
Keep these instructions
in
a
safe place
for future
reference.
Care
and Safety advice
Please
follow the instructions
as
listed
in
this manual.
Sort the parts and check against the list of contents.
For
safety purposes we
strongly recommend that the product will
be
assembled
by at least two people.
Some parts have metal edges.
Please be
careful when handling components.
Always wear gloves, shoes and safety goggles during assembly.
Do
not attempt to assemble the Gazebo
in
windy
or
wet conditions.
Dispose
of
all
plastic bags safely
-
keep
them away from children's
reach.
Keep
children away from the assembly
area.
Do
not attempt to
assemble the Gazebo if you are tired, have taken drugs,
medications or alcohol, or
if
you
are
prone to dizzy spells.
When using
a
stepladder
or power tools, ensure
that
you are
following the
manufacturer's safety advice.
Do not climb or stand on the roof.
Heavy
articles should not
be leaned against the poles.
Heavy load
of snow
on
roof
can damage the Gazebo making it unsafe to
stand below or nearby.
This
product
was designed and produced for
it's
aimed purpose only.
If
color
was
scratched during
assembly it can be fixed
with the following tints:
Grey
-
RAL
7012
»
Cleaning instructions
In
order to
clean
the
Gazebo, use
a
mild detergent solution and rinse
with
cold clean water.
Do not
use
acetone, abrasive cleaners, or other
special
detergents to
clean
the
panels.
During Assembly
During assembly
use
a
soft surface below the parts
to avoid scratches and damages.
»You
will
need
(Supplied)
(These
items
are
not supplied)
i
When
encountering the information
icon, please refer
to the relevant
assembly step for additional comments and assistance.
Step 9:
Please make sure
that the bolt
head
is
positioned
on
the external side of the
pole.
*This does not refer to step
11
It
is
recommended to
use
a
carton or other soft material under the lowered
corner
in
order to avoid scratches and peeling of
paint.
Optional -if you wish to add curtains
-
Please
thread the plastic clips through
the
rail in each
profile
in
order to hang additional curtains (not supplied). Add
clips according to the specific
quantity of curtain
rings.
Step
10:
The
use
of
a
screwdriver
is
optional.
In
order to insert the bolt through the profile,
please create
a
small gap by
pulling profile #7664 backward.
Step 18:
Please
drill the holes
in
the panel evenly and
in
front of the
holes in
profile #7663.
Fasten all nuts at the end
of
assembly.