Troubleshooting - Contec CMS50D Gebrauchsinformation

9. Troubleshooting

Trouble
The SpO
Pulse Rate
can not be
displayed
normally
The SpO
and Pulse
Rate are not
displayed
stably
Downloaded from www.Manualslib.com
English
Possible
Reason
and
1. The finger
2
is not properly
positioned.
2. The
patient's SpO
is too low to
be detected.
1. The finger
2
is not placed
inside deep
enough.
2. The finger
is shaking or
the patient is
moving.
manuals search engine
Solution
1. Place the
finger properly
and try again.
2. Try again;
Go to a
2
hospital for
a diagnosis if
you are sure
the device
works all right.
1. Place the
finger properly
and try again.
2. Let the
patient keep
calm.
44