nedis UPSD650VBK Anleitung Seite 2

Uninterruptable Power Supply
Product Overview
1. Power switch
2. AC mode: green light
3. Battery mode: yellow flashing
4. Fault LED: red light
5. UPS status LED: AC mode: green light
Battery mode: green flashing
6. AC mode: indicates load level
Battery mode: indicating battery
capacity
1. Output points
2. AC output
3. Circuit breaker
4. Surge protection
5. USB communication port
Note: Before installation check that nothing inside the package is damaged.
Caution: Never connect a laser printer or scanner to the UPS unit. This may damage to the unit.
Placement & storage
Install the UPS in a protected area that is free from excessive dust and has adequate air flow (see picture
below). Place the UPS away from other units by at least 20 cm to avoid interference. Do not operate the UPS
when the temperature and humidity is outside specified limits. (Please check specs for the limitations).
ENGLISH
2
Front view
Rear view