Linnenberg Georg Philipp Telemann Bedienungsanleitung Seite 28

for a digital input without a valid signal:
for a digital input with a valid signal / sample
for a digital input with a valid signal / sample
rate and balance adjusted:
Pushbutton operation
As stated earlier in this document, there is no
need to operate the hard wired mains switch
on the rear of the TELEMANN. If you want to
switch on or off the unit, use the front panel
pushbutton. Doing so, TELEMANN stores the
current settings (volume, input, filter) even when
the mains voltage is lost thereafter.
rate:
for an analogue input:
28