Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. Heli Scale Quality Anleitungen
  4. Flugzeugmodellen
  5. Bell UH-1D Iroquois
  6. Montageanleitung

Heli Scale Quality Bell UH­1D Iroquois Montageanleitung

Vorschau ausblenden

Werbung

Quicklinks

Diese Anleitung herunterladen
Assembly
instructions
Scale

Werbung

loading

Verwandte Anleitungen für Heli Scale Quality Bell UH­1D Iroquois

Inhaltszusammenfassung für Heli Scale Quality Bell UH­1D Iroquois

  • Seite 1 Assembly instructions Scale...

  • Seite 2: Specifications

    Contents Page Specifications Preparation of motor group Assembly Painting Final assembly Installation of mechanics First flight Care warnings Specifications Scale size Weight Assembly time Rotor diam. Body assembly Body length Painting Body width Completion parts Decal Application Body Height Compatible models For customer support please contact us:...
  • Seite 3 Please read these instructions completely before beginning to assemble Failure to do so could result in problems later during assembly Preparation of the mechanics We will be building this model using an EFlilte Blade MCPX. nonessential parts must be removed. This includes the body, landing gear and tail boom.
  • Seite 4 The smaller resin and plastic pieces are cleaned and any small casting holes or thin sections are filled with model putty then sanded at this point. At this point we will roughly remove the body sections from the vacuform. Cut approximately 5 mm from the body contour into the waste area of the template.
  • Seite 5 After removing the body from the form, set it on a smooth flat surface such as a table or piece of glass. We can then see how well we followed the cut line. Any excess can then be trimmed or removed using 150 grit sandpaper. Different model shown Once both sides have been sanded flat we affix them to each other using Tesa clear mounting...