Inhaltsverzeichnis
Werbung
IC WARNING STATEMENT
This device complies with Industry Canada licence-exempt RSS-210 standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil est conforme au(x) standard(s) de l'industrie canadienne RSS-210. Son
fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas
provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris celles
pouvant causer un mauvais fonctionnement de l'appareil.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a Integral Antenna and maximum 2 dBi gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
RF Exposure Statement:
This device must be installed to provide a separation distance of at least 20 cm from head and
body of all persons and must not be collocated or operating in conjunction with any other
antenna or transmitter.
Always keep the antenna at least 1 cm away from the hands when operating that to perss
those function keys of the device, to ensure IC RF exposure compliance requirements are not
exceeded.
The information listed above provides the user with the information needed to make him or
her aware of RF exposure, and what to do to as-sure that this radio operates with the IC RF
exposure limits of this radio.
Downloaded from
www.Manualslib.com
manuals search engine
Werbung
Inhaltsverzeichnis
