Battery Indicator - Velleman VTRCS Anleitung

4. Description (fig. 1)
1. Switch (up = screw / down = unscrew)
2. Bit holder
3. LED light
4. LED light ON / OFF switch

5. Battery indicator

6. Charging socket
5. Charging
Unpack your VTRCS carefully. Note that the device will not be fully charged. Before first use, charge the device for 5
to 8 hours. To do so, insert the charger plug into the charging socket (6) of your VTRCS. Plug the battery charger
into the mains.
ATTENTION! To avoid overheating the battery, do not exceed the maximum charging time of 8 hours. Do not leave a
6. Use
Insert the bit into the bit holder (2). Do not activate the device and make sure the bit
holder has come to a full stop. Place the bit firmly and as straight as possible onto the
screw and push the switch to rotate in the desired direction (see fig. 2).
Note that your VTRCS features spindle lock function enabling you to turn screws manually.
7. Battery Indicator
Your VTRCS is equipped with a battery level indicator (5). Simply press the battery indicator button (5) to check the
power left (green / yellow / red LED from full to low power level). Recharge your drill when only the red LED is lit.
8. The LED Light
Switch on the light by pushing the light switch (4). Note that the battery's autonomy will be reduced when using the
light for a prolonged time.
9. Cleaning and Maintenance
1. Wipe the device regularly with a damp, lint-free cloth. Do not use alcohol or solvents. Dry thoroughly afterwards.
2. In order to maintain battery capacity, we recommend the battery to be completely discharged and recharged
again every two months.
3. Only store the device in a dry and moist-free environment with an ambient temperature not exceeding 50°C.
4. There are no user-serviceable parts.
5. Contact your dealer for spare parts if necessary.
10. Technical Specifications
Power Supply Charger
Power Screwdriver
Bit Diameter
Charging Time
The information in this manual is subject to change without prior notice.
VTRCS
Downloaded from www.Manualslib.com
charging device unattended.
manuals search engine
max. 230VAC / 50Hz
4.8V
Ø ¼" (6.4mm)
5 ~ 8 hours
- 2 -
Fig. 2
Unscrew
Screw
VELLEMAN