Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.4 Connecting the transmitter
to an electric guitar
To connect the transmitter to an electric guitar:
1) Mount the 6.3 mm adapter (13) onto the 3.5 mm
plug (14) of the transmitter and fasten it with the
locking ring (15).
2) Connect the transmitter to the output jack of the
guitar. The angle of the plug on the transmitter
can be readjusted, it locks into place in steps of
22.5°. Thus, the transmitter optimally fits in case
of connection jacks on the upper side of the
body (fig. 5) and on the rib of the guitar (fig. 6).
3) To prevent uncontrolled turning of the transmit-
ter in the jack while playing, the transmitting
antenna (18), e. g. in fig. 6, may be fixed to the
rib of the guitar with the supplied support (26).
‘
12
Downloaded from
www.Manualslib.com
26
manuals search engine
4.5 Using the transmitter
with the microphone
For using the transmitter with the microphone sup-
plied:
1) Mount the microphone (22) onto the 3.5 mm
plug (14) of the transmitter and fasten it with the
locking ring (15).
2) Slide the clamping support (23) from below on
the guitar-shaped base (16).
3) Fix the clamping support on the instrument.
Fig. 7 shows the mounting at the bell of a saxo-
phone. The clamping brackets are rubberized to
save the instrument.
4) Align the microphone cartridge (21) to the sound
source. As suggested with the arrows in fig. 4,
the microphone can be tilted around two axes. In
addition, it can also be panned by turning it on
the 3.5 mm plug.
’
Werbung
Inhaltsverzeichnis
