Operation - Sentiotec Led-Fls Montage- Und Gebrauchsanleitung

Instructions for use for the user

5. Operation

● Switch on the light system
► Switch on the system with the ON/OFF button.
► The last settings are activated.
● Colour ring
► Briefly press the button for the desired colour
► Only static colour modes
● Mode
► Press the button to switch to the next mode
► 10 modes can be selected:
Modes 1-3: white: static, flashing, progression
Modes 4-10: different colour progressions
● Speed / brightness +/-
► + Speed/brightness is increased
► - Speed/brightness is reduced
► For static modes (single colours): Variable brightness
► For dynamic modes (colour transitions): Variable speed
● Pause
► Colour modes are interrupted
► Press again to continue the colour mode
On/Off
Colour ring
Sensor light
Speed/
brightness +
Pause
Mode
Speed/
brightness -
p. 5/6
EN