Sentiotec LED-FLS Montage- Und Gebrauchsanleitung Seite 2

Instructions for installation and use
1. About this instruction manual
Read these installation and operating instructions carefully and keep them close
to the infrared control unit. This ensures that you can refer to information on
safety and operation at any time.
These installation and operating instructions can also be found in
the downloads section of our website: www.sentiotec.com/downloads.
2. Important information for your safety
The LED RGB colour light set is to be used as mood and effect
lighting in accordance with the technical data.
Please follow the following safety instructions.
2.1. Intended use
The LED RGB colour light set is used to adjust the LEDs in your
sauna cabin. You can adjust the colour, brightness and speed of
the individual modes with the remote control supplied.
Any use exceeding this scope is considered improper use. Improper
use can result in serious injury or damage to the product.
2.2. Safety information for the installer
● It may only be installed when the power has been disconnected.
● NEVER open the device.
● For your own safety, consult your supplier in the event of prob-
lems that are not explained in sufficient detail in the installation
instructions.
p. 2/6