Cleaning The Heater - Classic Fire Modena AJ-311 Bedienungsanleitung

NOTE: When the heating function is used for the first time, a slight
odour may be produced. This is normal and should not occur again
unless the heater is not used for an extended period of time.
Power
The power switch
This switch must be in the ON position for any functions to work.
Temperature control knob
Put the temperature switch
knob to adjust the temperature.
Maintenance and cleaning
WARNING! DANGER OF DEATH BY ELECTRIC SHOCK!
- Before performing any cleaning or maintenance work, unplug the
appliance and let it completely cool down.
ATTENTION! DANGER OF BURNING!
- It is imperative to let the appliance completely cool down before
any work is done on it.
ATTENTION!
- Only an electrical technician should conduct repairs; failure to
comply may lead to risk of injury and/or damage to the appliance.

Cleaning the heater

- Aggressive or corrosive cleaning agents should never be used;
they could cause damage to the appliance.
- Use a slightly damp cloth to clean the housing.
- Clean the ventilation slots regularly and thoroughly (e.g. with a
vacuum cleaner) so that no dust can accumulate.
- Clean the glass plate with a damp cloth and, if necessary, with a
glass cleaner.
ATTENTION! Ensure that the glass plate does not fall off its
mounting, as this could result in damage to the appliance.
Disposal
All the packaging consists of environmentally friendly materials. They can
be disposed of as domestic waste.
controls the power supply to all the functions of the heater.
in the ON position, then use the temperature control
7