Herunterladen Diese Seite drucken

Seto FC-250 Gebrauchsanleitung Seite 3

Led flashlight

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Typ
Leuchtmittel
Lebensdauer Leuchtmittel
Batterien
Betriebsdauer*
Schaltmodus
Lichtstrom
Schutzart
Gewicht
Abmessungen
Artikelnummer
*durchschnittliche Leuchtdauer im Dauerbetrieb bis zu einem Lichtstrom von 3 lm
1.
Before inserting / replacing the batteries, the
luminaire must be switched off. Unscrew the
luminaire body counter-clockwise and take
out the battery holder. Put the 3 AAA alkaline
batteries according to the indicated direction
into the holder. Place the holder back into the
luminaire housing and screw the luminaire
again tightly.
Attention: The luminaire does not work
when the batteries are inserted wrongly.
2.
To switch it on / off, push the on / off button.
3.
To adjust the light cone, hold the luminaire
body and slide the lens back and forth in order
to adjust the desired light cone.
Downloaded from
www.Manualslib.com
LED Flashlight FC-250, fokussierbar
HIGH POWER LED
ca. 100.000 Stunden
3 x AAA Alkaline
Volle Leistung: ca. 3 Stunden
Geringe Leistung: ca. 12 Stunden
starkes Licht – schwaches Licht – Impulslicht
ca. 250 lm
IPX6
ca. 147 g (ohne Batterien)
Ø 34 mm x 136,5 mm
78__0G619C
Operation
Focus
Lens
Housing body
manuals search engine
Technische Daten
4.
Multiple function (optional)
Light push of the button, when turned on,
makes the mode change possible in the order
strong light – weak light – impulse light. The
luminaire can be turned off in every mode by
pressing the button.
1.
A warranty claim presupposes a correct hand-
ling; the warranty duration is 12 months after
purchase and refers to faulty parts or production
processes which make the product unusable.
The customer is not authorised to carry out
Battery holder
repairs on the luminaire. The producer or an au-
thorised distribution partner have to decide if
the product has to be repaired or replaced.
2.
If the product is sent in for repair, it has to be
packed thoroughly, and the service retailer has
to be contacted. The respective invoice do-
cument (with purchase date) has to be in the
package. Sent in products without the respec-
tive document cannot be considered for the
manufacturer's warranty.
3.
Damages, which are demonstrably caused by
improper handling, are excluded from the war-
ranty.
Warranty
Closing cap
Open
Close
On / Off
3

Werbung

loading