Method Of Use - Vegas Cosmetics Body Former Handbuch

(Front)
Function Indicator
Screen
23
BODY FORMER SPECIFICATIONS
THE DEVICE:
(Back)
LED light: 24 bulbs
Red/Blue
Cavitation
RF/EMS
SCREEN AND FUNCTIONS
Timer
Level Indicator
Battery
PREPARATIONS AND PRECAUTIONS FOR BODY FORMER
BEFORE USE:
TEST THE CAVITATION FUNCTION:
Place the device on a flat surface and sprinkle a few drops of water on the applicator.
Turn on the device, pressing the ON/OFF button and then press the CAVI button to
activate the Ultrasound. Now select the intensity you want (low; high).
When the drops of water vibrate the Ultrasound is working correctly.
TEST SKIN FOR ALLERGIES:
Test on clean skin, on the wrist
Apply the treatment product (Forming Gel) and watch for skin reactions. If there is any
unpleasant reaction during the test, stop the treatment immediately.
If there is no unpleasant reaction you can immediately use the device and the treatment
product.
If at any time during use you feel discomfort or an allergic reaction, stop the treatment
immediately.

METHOD OF USE

ON/OFF:
Press to turn the device on or off.
Select Programme:
• The function changes every time you press MODE. The order is as follows:
COMBI (RF+CAVI+EMS) -> RF -> CAVITATION -> EMS -> Function off
• To activate the Phototherapy function, press ON/OFF again. The sequence
changes as follows:
Red Photon -> Blue Photon -> Photon turn off
Level of intensity:
Level selection is available for RF, CAVI and EMS. The standard is Level 1. Whenever you
press the LEVEL button, the intensity increases.
The order is as follows:
Level 2 -> Level 3 -> Back to Level 1
EN
24