How To Set The Clock Manually - Oregon Scientific BAR122HGN Bedienungsanleitung

mechanism will override all manual settings.
When the unit is receiving radio signal, the RADIO
RECEPTION signal will start to blink. A complete
reception generally takes about 2 to 10 minutes,
depending on the strength of the radio signal.
When the reception is complete, the RADIO RECEPTION
signal will stop blinking. The strength of the reception will
remain until the next scanning cycle backs place.
For better reception, place the clock away from
metal objects and electrical appliances to minimize
interference.
- Strong
- Weak
- No signal
- Receiving
If you wish to disable the auto-reception feature, press
the [ TIME / ] button for three seconds. The radio
reception signal [
P/N:086L002706-173 REV1
13/99
BAR122HGN_UM_EN.indd 12
Downloaded from www.Manualslib.com
] will disappear. The unit will not
manuals search engine
respond to radio signals.
To enable the feature again, press the [ TIME /
for three seconds.
The radio reception signal [
reception automatically.

HOW TO SET THE CLOCK MANUALLY

To set the clock manually, hold [ MODE/SET ] for three
seconds. The hour digits will blink.
Press [ TIME / ] or [ TIME /
the button to increase or decrease the value rapidly.
Press [ MODE/SET ] to confirm. The minute digits will blink.
Repeat the same procedure to set the minutes, current
day, month, display language, weekday and hour offset
for the 2nd time zone.
NOTE The time and date are displayed in 24-HOUR clock
format. For the language display, you can choose among
English (E), German (D), French (F) and Italian (I). Weekday
is in the usual sequence of Monday through Sunday.
For the 2nd time zone, which is indicated by the ZONE
icon, enter the hour offset using the [ TIME /
TIME / ] buttons and the BAR122HGN will calculate
the second zone-time accordingly.
If there is an item you do not wish to change, simply press
[ MODE/SET ] to bypass the item.
When you are done, press [ MODE/SET ] to exit. The
display will return to the mode last chosen.
12
] button
] will start blinking to initiate
] select the hour. Keep pressing
] and [
2/26/08 9:39:44 AM