Cleaning; Cleaning Before Use; Cleaning After Use - Gima LD-101 Handbuch

21

Cleaning

Caution
1. Clean and sanitize the parts below before using your pump for the first time.
2. Only use drinking-quality tap or bottled water for cleaning.
3. Take apart and wash all parts that come in contact with the breast and breastmilk
immediately before and after use to avoid dry up of milk residues and to prevent
growth of bacteria.
4. Please disassemble all parts which require clean to make sure cleaning thoroughly.
5. Please place parts on a clean environment to avoid being polluted.

Cleaning before use

1. Take apart and wash/sanitize all parts that come in contact with the breast and
breastmilk.
2. Put all seperated parts into pot. Fill in the pot with enough dringking- quality tap or
bottled water to cover all parts.
3. Bring the water to boil. Place parts in boiling water for 5 minutes.
4. Allow water to cool and gently remove the parts from the water. Be careful and don't
scald your skin.
5. Place the parts neatly on a clean paper towel or in a clean drying rack and allow
them to air dry. Avoid using cloth towels to dry the parts because they can carry
germs and bacteria that are harmful to your baby.
• Breastshiled
• Values
• White membranes
• Nipple
• Breastmilk bottle and lid

Cleaning after use

1. Take apart and wash all parts that come in contact with the breast and breastmilk.
2. Rinse in cool water all separated parts that came in contact with breast and breast-
milk in order to remove breastmilk residue.
3. Place the parts neatly on a clean paper towel or in a clean drying rack and allow
them to air dry.
IMPORTANT
The flanges and milk storage containers can also be washed on upper rack of a
standard, household dishwasher. DO NOT use solvents or abrasives. Allow to air
dry on a clean surface. DO NOT put parts in Steam Bottle Sterilizers or Microwave
Sterilizer Bags.
ENGLISH