TechniSat PowerLine Webcast 2 Benutzerhandbuch Seite 22

EN
Adding a new TechniSat PowerLine Webcast 2 to an existing TechniSat
2
PowerLine Webcast 2 network
PowerLine
Ethernet
Modem/Router
If your existing TechniSat PowerLine Webcast 2 network has already been secured using
the encryption button, proceed as follows to integrate additional adapters. After you have
successfully connected the new TechniSat PowerLine Webcast 2, you have to press firstly
the encryption button (and hold for 2 seconds) on an adapter in your existing network,
then the encryption button on the new TechniSat PowerLine
Webcast 2 (for 2 seconds again). And that's it! The new TechniSat PowerLine Webcast 2 is
now integrated into your network.
To integrate additional TechniSat PowerLine Webcast 2 adapters into your network, repeat
the process described above.
3
Removing a TechniSat PowerLine Webcast 2 from the network.
PowerLine
Ethernet
Modem/Router
22
PowerLine
Ethernet
PC
PowerLine
Ethernet
PC
PowerLine
Ethernet
Set-Top-Box
& TV
PowerLine
Ethernet
Set-Top-Box
& TV