Blaupunkt HMM401 Bedienungsanleitung Seite 7

HMM401
1. A switch with speed controller (Turbo, 0, 1, 2, 3, 4, 5)
2. Attachment-release button
3. Beaters
4. Hooks
5. Mixer body with motor
BEFORE THE FIRST USE
1. Remove all paper, cardboard, and film protecting the device and its parts.
2. Clean the device according to the recommendations provided in the CLEANING AND
MAINTENANCE section.
USE
1. Make sure the device is disconnected from the power supply. Insert either one or two selected
attachments (beaters or hooks) into the sockets.
2. Place the attachments in a bowl or other vessel filled with products for mixing. Do not immerse
the attachments deeper than halfway (mixed products can climb up the attachment into the
engine section and flood the engine).
3. Start the mixer with the switch and set the speed from 1 to 5, or select the turbo-pulse mode.
4. When the mixing is complete, disconnect the mixer from the power supply. Press the
attachment-release button to remove the mixing attachments.
CLEANING AND MAINTENANCE
Wipe the body with the motor with a slightly moistened cloth. Do not immerse the device in water.
Wash the beaters and hooks in water mixed with a dishwashing liquid. Rinse thoroughly.
5