Harman JBL ON STAGE 400P Bedienungsanleitung Seite 7

UNPACKING YOUR JBL ON STAGE
Carefully unpack your speaker system and identify all its components: Carefully unpack your speaker system and identify all its components:
™*
JBL On Stage 400P
QUICK SETUP INSTRUCTIONS
•
Plug the barrel end of the power supply cord into the power jack and plug the other end into the wall. Plug the barrel end of the power supply cord into the power jack and plug the other end into the wall.
•
Next, push the power switch; a green LED will light up, indicating that the unit is powered. Next, push the power switch; a green LED will light up, indicating that the unit is powered.
•
Find the correct adapter for your iPod Find the correct adapter for your iPod/iPhone, then fi rmly place it into the docking area shown.
•
Next, place your iPod/iPhone into the dock, making sure your iPod Next, place your iPod into the dock, making sure your iPod/iPhone is fi rmly seated.
•
Adjust the volume, using (+) to increase and (–) to decrease. Press both to mute the JBL On Stage 400P unit. Adjust the volume, using (+) to increase and (–) to decrease. Press both to mute the JBL On Stage 400P unit.
Press either button to unmute. Press either button to unmute.
Power
Jack
Auxiliary
Power
DC-In
Port
Switch
Power Audio-In
DC-In
Power Audio-In
MENU
Adapters for IR remote
iPhone and iPod
, then fi rmly place it into the docking area shown.
JBL
™* 400
P
JBL
Power supply Audio cable
is fi rmly seated.
WWW.JBL.COM 7 7