Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
2-port DVI splitter
Item no. 1429817
Intended use
The product is intended for connecting a DVI-compatible playback device and 2 DVI-compatible
output devices. The product allows for transferring the digital video signal of a single playback
device to 2 output devices simultaneously. Power is supplied via the included power adapter.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• 2-port DVI splitter
• 4x rubber feet
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or
scan the printed QR code. Follow the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• The mains outlet must be located near to the device and be easily accessible.
• Only use the supplied mains adapter as a power supply.
• Only connect the power adapter to a normal mains socket connected to the public
supply. Before plugging in the power adapter, check whether the voltage stated on
the power adapter complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the cable;
always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• Power adapter (5V/2A)
• Operating instructions
• For safety reasons, disconnect the power adapter from the mains socket during
storms.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated could destroy the product. The
plug-in power supply unit also involves danger to life by electric shock! Allow the
device to reach room temperature before connecting and using it. This may take
several hours.
• Do not put any objects on the product and never cover it.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Connection and operation
• Make sure the product and all devices to be connected are switched off.
• If necessary, attach the rubber feet to the bottom of the product.
• Place the product on a stable, flat and horizontal surface.
• Connect a playback device to the Input connector via a DVI-D cable.
• Connect to 2 output devices (e.g. monitor) to the Output1/2 connectors using DVI-D cables.
• Connect the low-voltage plug of the provided power adapter to the respective socket on the
product.
• Connect the power adapter to a suitable household power outlet.
• Turn on the product using the ON/OFF switch. The red LED indicator on the switch lights up.
The product is operational.
• Turn on the connected devices.
If the display device has a lower resolution than the playback device, change the
resolution on the playback device to match the display device.
For resolutions higher than 1920 x 1080 you must use dual link DVI-D cables.
Cleaning and care
• Before cleaning, disconnect the product from the connected devices and from the power
supply.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other chemical
solutions since these can penetrate the housing or impair functionality.
• There are no components located inside the product you need to maintain. Never open/
dismantle the product.
• Clean the product with a dry, fibre-free cloth.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
a) DVI splitter
Input.............................................. 1 x DVI-D (dual link)
Output ........................................... 2 x DVI-D (dual link)
Supported resolutions ................... up to 1920 x 1080 @60 Hz (single link)
up to 3840 x 2160 @30 Hz (dual link)
Colour depth ................................. 24 / 30 / 36 bit
Cable length ................................. up to 10 m
Current consumption .................... max. 0.8 A
Operating conditions ..................... -5 to +45 °C, 10 – 90 % RH (non-condensing)
Storage conditions ........................ -15 to +55 °C, 5 – 95 % RH (non-condensing)
Dimensions (W x H x D) ............... 179 x 28 x 66 mm
Weight .......................................... 370 g
b) Power adapter
Input voltage/current ..................... 100 – 240 V/AC, 50/60 Hz, 0.3 A
Output voltage/current .................. 5 V/DC, 2 A
Cable length ................................. 120 cm
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1429817_V1_0516_02_IPL_m_en
Werbung
