Fault Finding - Gamko VK/10 Gebrauchsanweisung

Emergency
Pull out the plug!

Fault finding

Please ensure the plug is disconnected from the mains:
Symptom:
Cause:
Solution:
Symptom:
Cause :
Solution:
Temperature is too high with thermostat set correctly
a. The refrigeration machine has no power supply
b. Cooler is overloaded
c. Thermostat is out of order
d. Compressor is out of order
e. The air flow grills are covered
f. Condenser is blocked with dust
a. Check/repair power supply
b. De load
c. Call your local Gamko distributor
d. Call your local Gamko distributor
e. Clear the air flow grills
Temperature is too low with thermostat set correctly
Thermostat is out of order
Call your local Gamko distributor
18