Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION INSTRUCTIONS
The Type 626 is designed for mounting in a Pk101 package, but can also be installed in customer-specific packages. The
green terminal is used to connect the power supply and the outputs. The black terminal is used to connect the I²C sensor.
ERROR POSSIBILITIES LKM625
Error occurred
No power is flowing
Output signal > 20 mA
Current fluctuates strongly
Display clearly too high or too low
We reserve the right to make changes due to errors and technical developments.
Cause of the malfunction
No supply voltage
Display unit defective
Cable break in the current loop
Polarity in the current loop reversed
Sensor defect
Condensation of the transmitter
Condensation in the sensor
June 2019
Werbung
