Setting The Date - Rodania VALJOUX 7750 Bedienungsanleitung / Internationale Garantie

Setting the time
pull the crown into position iii; the second hand (1) stops at this point. turn the crown clockwise or anticlockwise until
your watch displays the correct time. whenever the hours hand passes the 12-o'clock position, you will see whether it is
displaying midnight (the date changes) or midday (the date does not change).

Setting the date*

important: do not set the date* between 10 pm and 2 am (the movement is in the process of changing the date. this will
seriously damage the movement, and such damage is not covered under the rodania warranty.
pull the crown into position ii and turn it clockwise to adjust the date (4). during this operation, your watch continues to
function normally so there is no need to correct the time afterwards.
* Depending on model
44 l www.rodania.com
Downloaded from www.Manualslib.com manuals search engine