Connecting To The Battery - Trueshopping CT3AMBCM Bedienungsanleitung

5) When battery level indicator turns to 100% solid Green LED, it will automatically
switches from full charge to maintenance status to maintain batteries during prolonged
periods of storage without overcharging or damaging the battery.
6) The CT3AMBCM has four external holes for mounting. Mount the charger in a desired
location with equipped self-drill screws. It is important to keep in mind the distance to the
battery.
7) Following is the charger's technical specification:
AC Input
DC Output
Charger Type
Start Voltage
Housing Protection
Battery Type
Battery Capacity
Accessories Included
Ambient Temperature

CONNECTING TO THE BATTERY

1) Identify polarity of battery posts. The positive battery terminal is typically marked by
these letters or symbol (POS,P,+). The negative battery terminal is typically marked by
these letters or symbol (NEG,N,-).
2) Do not make any connections to the carburetor, fuel lines, or thin metal parts.
3) Identify if you have a negative or positive grounded vehicle. This can be done by
identifying which battery post (NEG or POS) is connected to the chassis.
4) For a negative grounded vehicle (most common): connect the RED POSITIVE clamp /
220VAC, 60Hz, 0.8A
6VDC, 3.5A;
12VDC, 3.5A;
12VDC, 1A;
Temperature Controlled
8 steps, Full-automatic Charging Cycle
> 1V
IP54
All Types of 6V & 12V Lead-acid Batteries,
and 12V Lithium Ion Batteries
2-120Ah (6V), 2-120Ah (12V), Maintains
All Battery Sizes
Clamp Connectors, Ring Connectors, 12V
Cigarette Lighter Plug, Screws
0℃ ~ +40℃