Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Card reader CR43e type C2.0
Item no. 1423739
Intended use
This product is intended for use as card reader for recording or reading compatible memory
cards via computer with type C USB port.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short-circuiting, fire,
electric shock etc. Read the instructions carefully and keep them for future reference. Make
this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Card reader
• Operating instructions
Up-to-date Operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the query you
can download displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the warranty/guarantee.
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts,
high humidity, moisture, flammable gases, vapors and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation
and protect it from any accidental use. Safe operation can no longer be
guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low
height can damage the product.
• Also observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a professional if you require assistance with product operation, safety
or connection.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Slots
1
Slot 1
M2 (max. 16 GB)
Slot 2
MS, MS-Pro, MS-Duo, MS Pro Duo, MS Pro HG; (max. 32 GB)
Slot 3
SD (max. 2 GB), SDHC (max. 32 GB), SDXC (max. 64 GB),
Mini SD (max. 2 GB), MMC (max. 64 GB)
Slot 4
Micro-SD (max. 64 GB)
Connection
1
Only one card can be read or recorded at a time.
Notes
• Installation of a driver is not required.
• Observe the operating instructions of the computers to be connected in regard to the use
of periphery devices.
• For older operating systems: Some memory card formats (such as exFAT) might require
the installation of a system patch in order for the card reader to recognize the memory
card. Refer to the operating instructions and the latest update information of your
operating system.
• The card reader or the card could get damaged if the card is improperly aligned and
inserted. Ensure correct alignment.
• Never disconnect the product or remove the card during data transmission. There is a risk
of loosing or corrupting data.
• Before removing a memory card, disconnect it from the device first in order to avoid
data loss, data corruption or product damage. Observe the operating instructions of your
operating system.
Cleaning
• Remove the product from the computer before cleaning.
• Never submerge the product in water.
• Clean the product with a dry, fibre-free cloth.
• Do not use any abrasive or chemical cleaners.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Power supply ...................................5 V/DC (via USB), max. 500 mA
Transfer rate ....................................max. 480 Mbps
System requirements .....................Windows
only 32 bit, Vista™ (32/64 bit), 7 (32/64 bit),
8.0 (32/64 bit), 8.1 (32/64 bit), 10 (32/64 bit),
Mac OS 10.0, 10.10, Linux Red Hat, Fedora 4
Cable length .....................................approx. 5 cm
Operating/storage conditions .......-10 to +50 ºC, 10 - 90 % RH
Dimensions (W x H x D)..................79 x 19 x 25 mm
Weight ...............................................18 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
2
3
4
2
®
XP (Home, Pro with SP1, SP2, SP3),
V1_0416_02-LS
Werbung
