Wall Mounting - Teddington DTF850E/R410A Bedienungsanleitung

posITIonIng THE DEHumIDIFIER
There must be free space of at least 30 cm between any other object and the front
and the top of the unit.
Your dehumidifier can be installed in any area with a too high relative humidity,
such as cellar, playing area, shed, archive or swimming pool.
The dehumidifier will begin to protect from the harmful effects of excess moisture
as soon as it is plugged in and switched on.
When positioning your dehumidifier, ensure that it is placed level.
Best results are obtained when windows and doors are closed, thus preventing the
possible influx of fresh, too humid, air.
When the unit is placed near a (swimming) pool, connect to the mains via a
transformer or a breaking switch, conform the local regulations regarding electrical
installations.
When the dehumidifier is in operation, open outside doors and windows only when
necessary.

WAll mounTIng

See page 4, fig. 5
The unit can stand on the floor or hung on a wall. All necessary items for wall
mounting are supplied in the plastic bag.
• Fix the supporting bracket with at least 5 screws horizontally to the wall.
Only use fixings of the appropriate type, this unit is heavy circa 40kg.
• Hang the unit on the bracket, the two tongues fit into the slots on the unit's rear
panel.
• Make sure the two rubber pads (3) on the tongues and the two rubber
supports (4) on the lower part of the rear panel are properly placed.
Downloaded from www.Manualslib.com manuals search engine
5
gb