Use; Cleaning And Maintenance - Casselin CCHCR40EA Handbuch

power system data. Connect the device only when there is compliance. The unit should be unpacked and
EN
checked fully before connecting by a professional.

5.2 Use

WARNING
The establishment of the installation of the device and maintenance must be performed only by professionals.
• Do not leave the unit without monitor.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The truck must be completely removed from its packaging. All guards must be fully
withdrawn.
Placing the truck on a solid flat surface. Never put the stand on a flammable surface.
Do not install near open fires or other heating appliances.
The electric cable must be protected at least 16 Amps. The plug must be plugged directly into a wall outlet.
Using a power strip will crack up the device.
Fit the protective glass in the locations provided for this purpose. Position the accessories in their intended
locations (porcelain pots, wiping buffer rake spatula ..).
Place the unit on the display (max diameter 41 cm). Heated to the apparatus for 10 minutes until it all
smoke and odor have dissipated.
Switch off and unplug the unit, then use hot soapy water to clean the stainless steel plates.
NEVER use cold water on the stainless steel plate as this may cause thermal shock.
USE
The griddle requires no seasoning.
Block 4 wheels with brakes.
Connecting power cable the device. Once connected, rotating the temperature adjusting knob of the griddle
to the desired temperature. The temperature may be between 60 ° and 300 ° C.
We recommend using this device at a maximum temperature of 250 ° C.
In 10 minutes, the temperature of 250 ° C is reached, the green light goes out.
The heated cabinet works with the knob on the cabinet door.
Turn the knob to the desired temperature; the green LED is lit during the heating time and turns off when
the temperature reached.
Oil the plate through the wiping pad CASSELIN and sunflower oil.
Pour batter in the middle of the cooking surface and the use CASSELIN pancake rake to evenly distribute
the paste on the cooking surface. To get the desired browning on the bottom side, use the spatula to flip
CASSELIN the pancake and cook the other side. Use CASSELIN pancake spatula to remove the pancake
once the cooking.
As the temperature decreases, the device starts to heat up and the green LED light up again.
At the end of the service, turn the thermostat to 0 and unplug the appliance.
NOTE
The device has a security system in case of overheating. Upon activation, disconnect the device and allow it
to cool. If this protection system will start regularly, it is imperative to contact your dealer.
After automatic shutdown, the unit may be commissioned only by pressing the reset button on the unit's back
for this, wait until the temperature drops, press the Reset button.

6. CLEANING AND MAINTENANCE