Adjustments (Digital Tv); Installation And Station Scan; Area Search; Manual Search - ZENEC ZE-DVB2000 Bedienungsanleitung

4. ADJUSTMENTS (DIGITAL TV)

4.1 INSTALLATION AND STATION SCAN

4.1.1 Area Search

Select to start a scan of the total frequency spectrum

4.1.2 Manual Search

Select to start a scan of user de ned criteria.

4.1.3 Auto-Search

Select to start a scan of user de ned bandwidth.

4.2 CONFIGURATION

4.2.1 OSD

Select to adjust the user interface. It is available:
OSD:
Time on OSD:
OSB timeout:
OSD Trans:
OSD Language: Set your OSD language
1. Audio Language: Set your favor audio language
2. Audio Language: Set your alternative language
4.2.2 TV, picture settings
Select to adjust TV and picture settings. It is available:
Display Mode:
Aspect Ratio:
Video Output:
Brightness:
Contrast:
Hue:
Saturation:

4.2.3 System Setup

Select to adjust system settings. It is available:
EQ Setup:
Surround:
Active Antenna:
LCN:
Area:
Downloaded from www.Manualslib.com
Choose between different color theme
Display time in OSD on/off
Set speci c exit time for OSD
Set OSD transparency
Choose between PAL/NTSC/Auto.
Set aspect ratio
Set video output
Set brightness of video output
Set contrast of video output
Set gradation of color of video output
Set saturation of video output.
Set different EQ curves for audio output
Set different surround effects for audio output
Turn on/off the power supply for antenna
Turn on/off display LCN (logic channel NO)
Set your reception area
manuals search engine
18