Werbung
Notes and Informations
Wiring:
The DRL can be connected with and without position light. You can select the desired
option by switching the connection as shown in the diagram.
Note: Please seal the not mounted plug with the enclosed rubber plug.
ECE-R48 directive for day time running lights (DRL) :
The DRL must be switched on automatically when the ignition ist switched on.
By activation the low beam the DRL must be going out.
The DRL should not going on togehther with the fog - and driving light.
ECE-R48 directive for position light :
If install additional position light, the existing position lights must be
permanently disused .
Commissioning:
If the vehicle has a factory-provided DRL-function, deactivate it in the serial
control unit.
Please contact your Ford garage to handle this.
Note:
The illustrations in this mounting instruction are exemplarily and don´t apply to
all trim variants.
If the images are not in accordance with your vehicle, a professional specialist should
check and guarantee the connection according to the enclosed diagram.
Montageanleitung/ instructions
c Copyright MS Design - Autotuning GmbH
12/12
Werbung
