Herunterladen Inhalt Inhalt Diese Seite drucken

Perel Tools EDB Bedienungsanleitung

Drahtlose fernbediente türklingel
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the EDB! Please read the manual thoroughly before bringing this device into service. If the device
was damaged in transit, don't install or use it and contact your dealer.
2. Features
• the EDB can be used as a doorbell, a remote pager or a panic switch
• the EDB has a range of approximately 240ft (= 80m)
• easy installation: no wiring or AC power required
• uses a coded radio signal to prevent the kind of false triggering traditionally caused by other devices
• a button on the remote control makes it easy to select the ringing tone
• meets the highest quality standards in telecommunications
• 16 different bell chimes: ding, ding-dong, Westminster ...
• ideal for your home, the office, workshops, etc.
3. Installation
a) Transmitter (see figure below)
• insert a 12V VR22 / EL12 battery (incl.) and close the cover
• select a ringing tone, choose a suitable mounting location and attach the device to the wall
b) Receiver (see figure below)
• insert three AA-batteries (not incl.)
• install the receiver anywhere you like: the dining room, the study, the bedroom, etc.
• the user can hang the device on the included screw.
EDB
EDB – WIRELESS REMOTE DOOR CHIME
transmitter
zender
émetteur
emisor
receiver (chime)
ontvanger (bel)
récepteur (sonnette)
receptor (timbre)
1
PEREL
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Perel Tools EDB

  • Seite 9: Edb - Drahtlose Fernbediente Türklingel

    Sender (siehe Abb. auf S.1) • Legen Sie eine 12V-Batterie (VR22 / EL12) in das Gerät ein und schließen Sie das Batteriefach • Bestimmen Sie einen Klingelton, wählen Sie einen geeigneten Montageort und befestigen Sie die EDB an der Wand b) Empfänger (siehe Abb.
  • Seite 10: Wartung

    • Setzen Sie das Gerät keinen hohen Temperaturen aus. Zu extreme Temperaturen können die Lebensdauer der EDB verkürzen, die Batterien beschädigen, das Plastikgehäuse schmelzen lassen, usw. • Gehen Sie vorsichtig mit der EDB um. Die Leiterplatten oder anderen Teile des Gerätes können bei einem Fall irreparabel beschädigt werden.

Inhaltsverzeichnis