Installation; Power-Cord Caution - Onix PH-15 Bedienungsanleitung

Thank you for purchasing ONIX Electronics. With sincere appreciation, we suggest that you should read this User's
Manual thoroughly before operation and keep the Manual properly for further reference. .

INSTALLATION

I n s t a l l t h e u n i t i n a we l l ve nt i l ate d p l a ce a n d n o t
exposed to high temperatures or humidity, nor any heat
sources such as heaters or radiators. Be sure to leave
space around the unit for ventilation to improve heat
radiation (at least 30 cm at top, 10 cm at rear, and 20 cm
at each side). If not enough space is provided between the
unit and walls or other equipment, heat will build up inside, interfering with performance or causing malfunctions.
CONNECTIONS
Before making or changing the connections, switch o the power switch to prevent damaging the product.
To connect the speakers, always check the correct polarity (red +) (black -) to avoid damaging them irreparably.
CONNECTING THE PIN-RCA CORDS
1
Left channel
3
White plug
Operation Description
Turn On/O the Machine
1. Connect the power cord and signal cable of the machine. Press the power button on the front panel of the machine
to [ ON].
2. To turn off the power of the machine, Press the power button on the front panel to [
Pull off the AC power cord from main outlet when the machine is not used for a long period of time.
Select MM or MC mode
1. Press the [SELECT] key on the front panel, You can choose MM or MC according to the actual phono type.
Note: When you restart the machine, the mode indicator light will keep same as the last position of power off.
The ampli er is equipped with lters for the suppression of radio interference in accordance with EEC regulation
Downloaded from www.Manualslib.com
L
2 Right channel
R
4
Red plug
manuals search engine
USER'S GUIDE
MAINTENANCE OF EXTERNAL SURFACES
Remove dust and dirt with a clean, dry cloth. Never use
solvents, gasoline, insecticide sprays and other chemicals on
or near the equipment because they can corrode the surfaces.

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your
hands are wet as this could cause a short circuit or electric shock.
Connect the white plug 3 to the L (left) channel 1, and the red plug
4 to the R (right) channel 2. Be sure to push the plugs securely.
OFF].
3