ASROCK Z77 Extreme4-M Handbuch Seite 21

2.7 SLI
This motherboard supports NVIDIA
technology that allows you to install up to two identical PCI Express x16 graphics
cards. Currently, NVIDIA
Vista
Windows
procedures in this section.
2.7.1 Graphics Card Setup
2.7.1.1 Installing Two SLI
Step 1.
Step2.
Downloaded from www.Manualslib.com
TM TM
and Quad SLI
®
SLI
TM TM
/ Vista 64-bit / 7 / 7 64-bit OS. NVIDIA
® TM TM
Vista / Vista 64-bit / 7 / 7 64-bit OS only. Please follow the installation
Requirements
TM
1. For SLI technology, you should have two identical SLI
cards that are NVIDIA
two identical Quad SLI ready graphics cards (dual-GPU on each graphics
card) that are NVIDIA certified.
2. Make sure that your graphics card driver supports NVIDIA
Download the driver from NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system. It is recommended to use NVIDIA
certified PSU. Please refer to NVIDIA
Install the identical SLI
because different types of graphics cards will not work together properly.
(Even the GPU chips version shall be the same.) Insert one graphics card
into PCIE1 slot and the other graphics card to PCIE3 slot. Make sure that
the cards are properly seated on the slots.
If required, connect the auxiliary power source to the PCI Express
graphics cards.
ASRock Z77 Extreme4-M Motherboard
manuals search engine
Operation Guide
® TM
SLI and Quad SLI
TM
technology supports Windows
®
Quad SLI
®
certified. For Quad SLI technology, you should have
®
website (www.nvidia.com).
®
website for details.
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
TM
(Scalable Link Interface)
®
XP / XP 64-bit /
TM
technology supports
TM
-ready graphics
® TM
SLI technology.
®
certified
®
21