Sonoro LIGHT Bedienungsanleitung Seite 19

2. Plug the device into a socket.
3. Ensure that sonoroLIGHT and sonoroCD 2 are no more than
4. Press the push-button (Fig. 1/1) until the LED (Fig. 1/2)
5. Switch off your sonoroCD 2.
6. Press the button
7. Connect a lamp to the socket on the device (Fig. 1/3).
5
Fig. 3: Do not dispose of in household waste
Devices that are marked with this symbol should not be disposed
of in household waste. They must be returned to a collection point
for recycling of electrical and electrotechnical devices.
Information regarding the disposal of old equipment can be
obtained at your municipality, local waste disposal company and
the store where you purchased this device. Proper disposal of old
devices prevents environmental damage and does not jeopardise
your health.
dienungsanleitung sonoroLIGHT_DE_EN_FR_NL_IT_2015-10-12.indd 19
10 m away from one another. Otherwise, no connection can
be established.
flashes.
Ö The device searches for another Bluetooth
3 seconds.
Ö The devices are connected to one another. No password
needs to be entered. Once the devices are successfully
connected, the LED (Fig. 1/2) lights up in white.
Disposal
on your sonoroCD 2 and hold it for
device.
®
19
12.10.2015 11:27:0
EN