Basic Operation - Meloq EasyForce Gebrauchsanweisung

Instruction for use - EN

Basic Operation

Before performing a measurement, attach suitable
addons and get the patient in the starting position and
then power the device on. To perform a measurement,
follow these steps:
Step 1 - With the patient in position and the device
powered on, press the main button to enter measu-
rement mode. The time values will blink.
Step 2 - Start measurement either by pressing the
main button again or instruct the patient to start
pulling. Measurement will automatically start when the
force reaches 5 N for more than 0.5 s.
Time to peak force
Measure
time
Current force
4