Technical Parameters; Block Circuit Diagram - Vigor Equipment V4891-3.5 Betriebsanleitung

12. Technical parameters

The induction heater is classifi ed according to the
Directive on Electromagnetic Compatibility and EN
55011:2016 + A1:2017 as a system of Class A of Group
2. "A system of Class A is a system suitable for use in all
locations, except for those that fall under living areas,
and those that are connected directly to a low-voltage
network of the power, which supplies buildings used for
residential purposes." "The systems of Group 2 are systems
in which the high-frequency energy is intentionally
generated and used in the frequency zone 9 kHz to 400 GHz."

13. Block circuit diagram

24
ViGOR GmbH
[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] info@vigor-equipment.com • ^ vigor-equipment.com
• ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY
Technical parameters
Frequency F1
Consumption
Protection rating
Working power
Power control
(CP Mode)
Field control
(CP Mode)
Length of induction
burner
Input power P1 max.
Inductive output
P2 max.
power
Power factor for
100% output
Dimensions
Weight
Cooling fluid
volume
50/60 Hz
I1 16 A
IP IP22
F2 18 – 60 kHz
10 – 100%, continuous
30 – 100%, continuous
2 m
3.7 kW
4.5 kVA
1
240 x 200 x 440
11.5
2.5