Noxon M740 Bedienungsanleitung Seite 47

Wired LAN (cable network setup)
• Automatic (DHCP IP)
Select this to have the IP address assigned automatically.
• Manual (static IP)
Select this to enter the IP address, subnet mask, default gateway and DNS server
IP address manually.
Wireless setup (WLAN setup)
• Select a connection profile
Your NOXON M740 can store up to three WLAN connections. Press OK to go to the
next step, the Back button to cancel or OK to continue.
• Select the connection mode
Choose between Infrastructure (AP) and Peer to Peer (Ad Hoc). Tip: If you have a
normal DSL router, you will usually use Infrastructure. Press OK to go to the next
step or press RETURN to cancel.
• Infrastructure (AP)
Infrastructure mode is used to connect computers with WLAN adapters to an exist-
ing network using a WLAN router or access point.
• Obtain SSID Name
Press OK to go to the next step, the Back button on your remote control to cancel
or Options to update the SSID list. Note: The abbreviations 'WEP' (Wired Equivalent
Privacy) and 'WPA' (WiFi Protected Access) in the Security list mean that the net-
work is encrypted. This means that a key is needed to have access to this network.
'NONE' in the list means that the network is open and unencrypted.
• Entering the WEP/WPA key
The password for encrypted networks can be entered via the on-screen keyboard
using the remote control. Use the navigation buttons to select the desired character.
Press OK to enter, CAPS to toggle between upper and lower-case letters, <- to de-
lete a character, -> to insert a character, Shift to display symbols and OK to confirm.
• Connection test
The test process can take some time – please be patient. If the test runs success-
fully, the network information (profile name, IP address, subnet mask, gateway etc.)
are displayed on the screen.
• Peer to Peer (Ad Hoc)
Peer-to-Peer mode (also known as Ad Hoc or Computer-to-Computer mode) is
used to connect wireless network devices to each other directly. A wireless router or
access point is not required.
• Ad Hoc setup
Press OK to go to the next step, the Back button on your remote control to cancel
and OK to connect.
Downloaded from www.Manualslib.com manuals search engine
47