Reinigung / Cleaning - Kessebohmer 839 101 901 Bedienungsanleitung

To perform a reset, proceed as follows:
1. Exit the energy-saving mode of the control system by briefly pressing the UP or DOWN button.
2. Hold down the UP and DOWN buttons at the same time. A er approx. 3 seconds, the reset
starts. Keep the buttons pressed until the reaching of the reset position is confirmed by a
double clicking sound from the control system.
3. Now release the buttons.
Notice
·
·
·
·
·
·
6

Reinigung / Cleaning

Sachbeschädigung durch falsche Reinigung.
VORSICHT
Halten Sie die Handschalter und Steckverbindungen stets frei von Staubablagerungen!
Reinigen Sie die Steuerung und den Handschalter mit einem trockenen, weichen Tuch.
6 Cleaning
Property damage due to improper cleaning.
CAUTION
www.kesseboehmer.de
The reset position of the drives is located approx. in the middle of the
stroke.
The reset position depends on the traversing range and the attachments
of the table.
If the table is located above the reset position, the table first moves below
the reset position and then from below up to the reset position.
If the table is located below the reset position, the table moves up to the
reset position.
If one column of the table is located above the reset position and the
other column is located below the reset position, the column which is
above the reset position first move below the reset position. Then both
columns are moved from below to the reset position.
Each column performs its own reset. This means that if one column is
pushed in further than the other, the column will reach the reset point
sooner and will complete the reset sooner than the other column.
Verwenden Sie keine Lösungs- oder Scheuermittel.
Verwenden Sie für die Reinigung ausschließlich trockene, weiche Tücher.
Do not use solvents or abrasives.
Use only dry, so cloths for cleaning.
Reinigung / Cleaning
19