Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY INSTRUCTIONS
1. Before using the device, inspect the case for any
mechanical damage. If the case has cracks or is missing
any part, do not use the device.
2. Do not use the device in temperatures exceeding the
range in specification, in high humidity, and near
explosives and flammables.
3. Before using the device, check the test leads for any
insulation damage. If the test leads has insulation damage
or cuts, do not use the device.
4. Do not input voltages higher than said in the specification.
5. During measurements, do not change the position of the
rotary switch.
6. Turn off the device before opening the battery
compartment cover.
7. Battery must be replaced with a new one and with the
same specification.
8. Do not interfere with the device's internal paths. This may
lead to measurement decrease or damaging the device.
9. The device is intended for indoors use only.
10. Take out the batteries, if the device is not going to be used
for a long time.
PRODUCT DESCRIPTION
Transmitter
1. Crocodile clip
2. RJ11 connector
3. RJ45 socket
4. LED indicator
5. Status LED
6. SELECT button
7. Position switch
8. VERIFY LED
1
2
3
4
4
5
6
7
8
7
7
2
3
6
5
STATUS
SELECT
SCAN
7
OFF
TEST
G
8
VERIFY
EN
DE
1
Werbung
Inhaltsverzeichnis
