Installing On To Pram - icklebubba Astral Bedienungsanleitung

Stomp V2 Chassis
Step 1: Adapter Attachment
Please insert each adapter into the car seat before attaching to the chassis.
Step 2: Car Seat Attachment
Please line up the car seat
adapters with the chassis and
apply even pressure on both
sides until you here a click.
Step 3: Removing the Car Seat
Seat Please firmly press down the 'release
buttons' on either side of the car seat which
are located under the fabric cover and lift
off. Please refer to the grey indicator tabs to
locate the 'release buttons'.
Please Note: the car sear adapters will
remain on the chassis after removing the
car seat. Please ensure these are removed
before attaching the seat unit. Please store
the adapters safely after use.

Installing on to Pram

l
"Click"
V.11.20
9