Switching The Appliance On - FRIONOR BTQ 631 PAT Bedienungs- Und Montageanleitung

E. Zone Selection key
F. Cooking zone Display
G. Zone Extention key
G*. LED - Zone Extention function
H. Timer key
I. Timer Display
I*. LED - Cooking Zone Timer function

• SWITCHING THE APPLIANCE ON

Press the On-Off key to switch the hob on.
All the cooking zones displays switch on
in the «0» standby position. The control
unit remains active for 10 seconds. If no
cooking zone is selected within this time, the
appliance switches off automatically.
NOTE: after connecting it to the power
supply the appliance is in safe mode, the
Control Lock is enabled. In order to use the
appliance remove the lock by pressing the
Lock key.
• SWITCHING A COOKING ZONE ON
Select the desired cooking zone by pressing
the Zone Selection key. The display of the
active zone will show «0». Adjust the desired
cooking level using the [+] and [-] keys
within 10 seconds. Press the Zone Selection
key to confirm the setting.
The power of the single cooking zone can be
adjusted in 9 different positions and will be
shown on the relative luminous display with
a level from «1» to «9».
• COOKING ZONE EXTENSION
(Second zone)
The appliance is equipped with a double size
cooking zone (Fig.8) which combines inner
and outer cooking areas and is recommen-
ded for larger cookware, large quantities of
food, and home canning.
To activate the second circuit of the cooking
zone select it and adjust the power then
press the Zone Extension key. The LED (G*)
lights up to indicate the activation.
To disable the extension of the cooking zone
press the Zone Extension key. The LED (G*)
goes off.
• RESIDUAL HEAT «H»
If the temperature of the cooking zone is
still high (over 50°) after it has been swi-
tched off, the relative display will indicate
the «H» symbol (residual heat). The symbol
will only switch off when the burn risk in no
longer present.
• TIMER
This function allows you to set the time from
«01» (1 minute) to «99» (99 minutes) for the
automatic switch off of a cooking zone.
To activate the Timer on a cooking zone, se-
lect it, adjust its power then press the Timer
key. The corresponding LED (I*) located
on one of the corners of the Timer display
blinks. At this point you can adjust the time
acting on the [+] and [-] keys. Press the cor-
responding Zone Selection key to confirm
the settings. The countdown is displayed
on the Timer display. Active Timers on the
cooking zones are displayed with their cor-
responding fixed LED (I*) at the corners of
the Timer display.
When time elapses the cooking zone will au-
tomatically switch off, the display will show
a flashing «00» and an acoustic signal will be
heard. Press any key to stop the signals.To
disable the Timer of a cooking zone select it,
then press the Timer key and use the [-] key
to bring the Timer value back to «00». Press
the corresponding Zone Selection key to
confirm the settings. The corresponding LED
goes off.
• CONTROL LOCK
Controls can be locked in order to prevent
any risk of unintentional changes to the
settings (children, cleaning operations, etc.).
To activate this function press the Lock
key. The relative LED (B*) will light up. The
function remains active when the appliance
is switched off and on again.
To disable the Control Lock function simply
press the Lock key. The relative LED will go
off.
• SWITCHING A COOKING ZONE OFF
To switch a cooking zone off select it by
pressing Zone Selection key then press si-
moultaneously the [+] and [-] keys. Alterna-
tively press the [-] key to bring its level back
12