Herunterladen Diese Seite drucken

Elgato EyeTV Hybrid Schnellstartanleitung Seite 5

Vorschau ausblenden Andere Handbücher für EyeTV Hybrid:

Werbung

hybrid
Connect roof antenna / cable line
EN
Connecting a roof antenna
Pull off the grey protective cap and connect EyeTV Hybrid to a
free USB 2.0 port on your computer. You can connect the stick
directly or via the supplied USB extension. Now connect the
socket which carries the signal for the roof antenna or cable
connection using a coaxial cable (not included) to the antenna
socket of EyeTV Hybrid. Insert the software CD, install EyeTV
and follow the instructions in the setup wizard. If your antenna
system or cable distribution system uses a signal amplifi er,
you may need to adjust its gain after installation of the
software in order to determine the optimum signal strength
for EyeTV Hybrid. After successful installation you can use the
Services menu in the Channels section of the EyeTV window
to switch between the analog tuner ("Antenna/Cable PAL"
for TV, "Antenna FM" for radio) and the digital tuner (DVB-T
or DVB-C).
DE
Eine Dachantenne anschließen
Ziehen Sie die graue Schutzkappe ab und verbinden Sie
EyeTV Hybrid mit einem freien USB 2.0 Port Ihres Computers.
Sie können den Stick direkt oder über die mitgelieferte
USB-Verlängerung anschließen. Verbinden Sie nun die
Steckdose, an der das Signal der Dachantenne oder des
Kabelanschlusses anliegt, über ein Koaxialkabel (nicht im
Lieferumfang) mit der Antennenbuchse von EyeTV Hybrid.
Legen Sie die Software-CD ein, installieren Sie EyeTV und
folgen Sie den Anweisungen des Einrichtungsassistenten.
Falls Ihre Antennenanlage oder Ihre Kabelverteileranlage
einen Signalverstärker einsetzt, testen Sie nach Installation
der Software bitte verschiedene Pegeleinstellungen, um die
für EyeTV Hybrid optimale Signalstärke zu ermitteln. Nach
erfolgter Installation können Sie in der Ansicht „Sender" des
EyeTV-Hauptfensters über das Menü „Dienst" zwischen dem
analogen Tuner („Antenne/Kabel PAL" für TV, „Antenne FM"
für Radio) sowie dem digitalen Tuner (DVB-T oder DVB-C)
umschalten.
FR
Raccordement d'une antenne de toit
Retirez le capuchon protecteur gris et connectez EyeTV
Hybrid à un port USB 2.0 libre de votre ordinateur. Vous
pouvez raccorder le stick directement ou via la rallonge USB
incluse. Raccordez alors la prise d'antenne murale où arrive
le signal de votre antenne de toit via un connecteur coaxial
(non inclus) avec la prise d'antenne de EyeTV Hybrid. Insérez
le CD du logiciel, démarrez l'installation d'EyeTV et suivez
les instructions de l'assistant d'installation. Au cas ou votre
installation d'antenne utilise un amplifi cateur, testez différents
niveaux d'amplifi cation après l'installation du logiciel de façon
à fournir à EyeTV Hybrid une intensité de signal optimale.
Après l'installation, allez dans la section Chaînes de la fenêtre
Programmes d'EyeTV et choisissez entre le tuner analogique
(«Antenne/Câble SECAM» pour la TV, «Antenne FM» pour la
radio) et le tuner numérique (DVB-T ou DVB-C).

Werbung

loading