Hama Sonic Mobil 160 Bedienungsanleitung Seite 8

g Operating Instruction
Position
1. Place the loudspeakers to the left and right of the
monitor and position them so that they face toward
you.
2. The distance between each of the two speakers
and your head should be as equal as possible.
Connecting the Loudspeaker System
Close all programmes used for sound playback.
First, plug the green jack plug into the socket on the
second loudspeaker and then insert the metal feet into
the slots on the rear side of both loudspeakers.
Insert the USB plug into a free USB port on your
computer or laptop and then wait until the operating
system detects and activates the device.
Carefully read through the safety notes before using
the device for the fi rst time.
Settings with Windows XP
Open „Sounds and Audio Devices" from your control panel.
00039790bda.indd Abs2:7 00039790bda.indd Abs2:7
Downloaded from www.Manualslib.com manuals search engine
Click „Advanced..." under „Speaker settings"
Select „Desktop stereo speakers" and click „OK".
Your sound settings are now optimised for this
loudspeaker system.
If you could not place the loudspeaker at equal distances
from your head, as described above, you can now
balance the volume between the two satellites.
To do this, click „Speaker volume..." under „Speaker
settings"
7
26.02.2008 8:41:40 Uhr 26.02.2008 8:41:40 Uhr