Quick Installation - Cudy 4G LTE Router Kurzanleitung Zur Installation

Quick Installation

1. Insert the Standard SIM card into the slot until you hear a click.
WAN/LAN LAN1 LAN2
SIM card requirement
Nano sim card
Micro sim card
2. Connect power adapter and turn on the router. Waiting for 2 minutes for
it to start.
3. Check the following LEDs' status.
4G Wi-Fi LAN3
If Internet LED is on , means connected to the internet successfully.
If internet LED is off, please follow the instructions of
LAN3 USB SIM Card PWR
1 2
Standard SIM
Nano sim adapter Standard sim card
Micro sim adapter
Standard sim card
LAN2 LAN1 WAN/LAN INTERNET
Customize The 4G
— 1 —
Customize The 4G Router
1. Connect the router via ethernet cable or Wi-Fi. Network name and
password is printed on the bottom of the router.
2. Launch a web browser and enter
in the address bar, use admin as password to login.
3. Below page would pop up if your SIM card needs PIN to unlock. Please
enter your PIN and click Save & Apply, then wait 15 seconds to connect
to the Internet.
POWER
Router.
4G LTE N300 Wi-Fi Router
Wi-Fi: Cudy-XXXX
Wi-Fi Password: XXXXXXXX
http://cudy.net/ (or http://192.168.10.1/)
http://cudy.net/
Auto
admin
Password
Log In
4G Settings
The SIM is locked, please enter the PIN code. You have
3 attempts at most for entering the PIN code.
PIN
Save & Apply
— 2 —
EN