Instructions For Use (Fig. 2, 3, 4, 5) - eta STEAMIO Bedienungsanleitung

Symbol Icon meaning
ECO
a lack of water in the tank
ECO
Self-cleaning system
ECO
AUTO-STOP – activation of the
safety function
the appliance is on/off to the
stand-by regime,
controlling the amount of steam
Self-cleaning is on/off
III. INSTRUCTIONS FOR USE (Fig. 2, 3, 4, 5)
Remove all the packing material and take out the iron. Remove any labels, protective foils
or covers from the ironing plate before the first use. Remove the power cord B6 and the
steam inlet hose A5 from the storage area B7 and completely unwind them. Place the boiler
B on a stable, flat and heat-resistant surface. Place the iron A on the resting surface B5.
At first switch the iron ON to maximum temperature and let the iron at least 10 minutes
running without water. The iron may produce slight smoke and harmless odor, which is
cased by burning of used lubricants and seals in steam chamber. This is normal situation
and does not form the reason for warranty claim. During first filling of the tank with operating
water it is recommended to release the steam from whole tank outside the ironed fabric.
Ironing temperatures
– Sort laundry and iron according to the instructions for treatment (e.g. manufacturer's
recommendation - the label on clothes).
– If clothes consist of e.g. two and more materials or if they contain stringing, purls,
embossing, stretch material, etc., always iron according to the material requiring the
lower temperature only. If you do not know the material, find the suitable place that is not
visible when wearing and try suitable temperature for ironing at the place.
– When ironing woollen fabrics, we recommend ironing on the back side of the fabric and
you can iron virgin wool through additional cloth. Velvet and similar fabrics can be ironed
in one direction (you will prevent creation of glossy areas).
– Steam ironing is not suitable for fabrics from synthetic and silk fibers (e.g. acrylon,
nylon, polyamide, spandex, elastane or polyester). If you decide to iron such
materials, you have to set the for low steam generation.
– Iron white and light materials on the right side; it is better to iron dark and embroidered
materials on the wrong side, it brings out the patterns.
– We recommend using soft textile permeable base materials for steam ironing.
– Make sure that the ironed fabric is tensed up properly so that steam does not leak to the
sides.
Button Lights signaling
blinking (flashing)
permanent light
blinking (flashing)
press and hold permanent light /
(2 sec). light is OFF
blinking (flashing) -
heating up,
short press permanent light -
reaching the proper
temperature
press and hold permanent light
(2 sec).
25 / 59
GB
Sound
signaling
3x beep
1x beep
6x beep
1x beep