VINCENT SA-94 Bedienungsanleitung Seite 28

BUTTONS OF THE REMOTE CONTROL
12
13
Vincent
28
12. MUTE
Pressing this button once cuts the signals at the
outputs "OUTPUT" (9) and "REC OUTPUT" (8) so
that the system's loudspeakers are muted.
Pressing it again returns to the original volume.
15
13. BAL-L und BAL-R
Both keys can be used to change the volume dif-
ference between right and left speaker if that is
desired.
14. Input selector keys
Select the input source you want to listen to with
these buttons.
14
15. GAIN:
-8dB attenuation of the output signal
With the activation of this function, the output
signal (9) is reduced by 8 dB and thus the volume
of the attached speakers. It should only be activat-
16
ed if even at low volume settings the volume is
already very high.
16. LEVEL /
These buttons change the amplifier's volume level
for the preamplifier outputs "OUTPUT" (9).