User Information - Ratio Electric HOME BOX PLUS Bedienungsanleitung

USER INFORMATION

1- PHASE CHARGE STATION
Press briefly the middle button to start. After starting, the charger is always ready
to charge with the previous settings. If you want to change the settings enter the
setup menu (see page 20 SETUP-MENU)
READY TO
CHARGE
You can reach the next screen with the right arrow button.
The menu below can be reached with the arrow button from a READY TO
CHARGE screen but also from CHARGING screen.
Here you can find more information about the consumption:
I: current (A)
U: voltage (V)
P: power (kWh)
Et: total kWh value (never reset)
By pressing the middle button, you can see the meter readings of the last 5
sessions.
Et (1): kWh
Et (2): kWh
Et (3): kWh
Et (4): kWh
Et (5): kWh
CHARGER ERROR
CHARGER
NOT READY
ERRCODE: ..........
www.ratio.nl
The values can be deleted by pressing the left and right
arrow buttons at the same time.
With the middle button you can go back to the previous
screen.
In case of the charger error, you will see the error
screen with the error code. If multiple errors occur the
codes will alternate.
By error message please contact Ratio Electric for
support.
ENGLISH 23
ENGLISH 23
I: A
U: V
P: kWh
Et: kWh
www.ratio.nl
HOME BOX PLUS / EV045
HOME BOX PLUS / EV045