Description; Installation - Ratio Electric HOME BOX PLUS Bedienungsanleitung

18

DESCRIPTION

This charging station is used for charging electric vehicles (EV's) and is
compatible with the common IEC61851 standard.
The Home Box Plus is equipped with an integrated kWh meter. This allows for
reading both the actual charging information and that of the last 5 sessions.

INSTALLATION

1. The installation must be done by a qualified and licensed electrician
according the local legislation.
2. The electrical installation must be free of power during the entire
installation period.
3. Since this Charging Unit uses circuits that reference to ground, no
Megging must be done after connecting to power.
4. Wiring and protection:
Version
16A / 1 Phase 3G2,50mm
16A / 3 Phase 5G2,50mm
32A / 1 Phase 3G6,00mm
32A / 3 Phase 5G6,00mm
* For cable length upto 25m
PLEASE NOTE:
www.ratio.nl
www.ratio.nl
Wiring * Mains Circuit Breaker
2 20A B/C-Characteristic
2 20A B/C-Characteristic
2 40A B/C-Characteristic
2 40A B/C-Characteristic
All charges include an AC (> 30mA) and
DC (> 6mA) residual-current-detection.
Always place a type A RCD and the MCB
(or combination unit) in the electrical
cabinet.
Residual Current Device
(MCB) (RCD)
30mA, Type A
30mA, Type A
30mA, Type A
30mA, Type A