Gaoke Strend pro Gebrauchsanweisung Seite 33

tool is dangerous. A damaged switch must be repaired by a certified service center.
- Disconnect the power tool before making any adjustments, changing accessories, or servicing. This
measure will reduce the risk of accidental triggering operation.
- Unused power tool shall be kept out of reach of children and unauthorized persons. A power tool in
the hands of inexperienced users can be dangerous. Power tool shall be stored in a dry and safe place.
- Carefully maintain the power tool in good condition. Check the moving parts and their mobility
regularly. Check for any damage to the guards or other parts that may compromise the safe operation
of the power tool. If the tool is damaged, make sure it is repaired before use. Many injuries are
caused by improper maintenance of a power tool.
- Keep cutting tools sharp and clean. Properly maintained and sharpened tools make work easier,
reduce the risk of injury and their control is easier. Use of accessories other than those specified in
the operating instructions or recommended by the importer may cause damage to the tool and cause
injury.
- Power tool, its accessories, work tools, etc. shall be used in accordance with these instructions and
in the manner prescribed for the particular power tool, taking into account the working conditions
and the type of work to be performed. Use of the tool for purposes other than those intended may
result in hazardous situations.
5) USE OF CORDLESS TOOLS
- Before inserting the battery, make sure the power switch is in the : "0-off" position. Inserting the
battery into the tool when it is switched on may result in dangerous situations.
- Only use the chargers specified by the manufacturer to charge the battery. Using a charger for
another type of battery may damage it and lead to fire.
- Use only batteries intended for the tool. - Use of other battery types may be the cause of an
accident or fire.
- If the battery is not used, store it separately from metallic objects such as clamps, keys, screws and
other small metallic objects that could cause connection of one contact of the battery with the other.
Short-circuit of the battery may cause an injury, burns or a fire.
- Handle the batteries with care. - Improper treatment may result in leakage of chemical fluid from
the battery. Avoid contact with it. If there is contact with the chemical fluid, wash the affected area
under the running water. If the chemical fluid gets in your eyes, seek medical assistance immediately.
Chemical fluid from the battery may cause a serious injury.
- The battery or tool must not be exposed to fire or excessive temperatures. Exposure to fire or a
temperature higher than 130 ° C may cause an explosion.
- The battery or tools that are damaged or rebuilt must not be used. Damaged or modified batteries
may operate in an unpredictable way and therefore may cause fire, explosion or injury.
6) SERVICE
- Have the power tool serviced by a qualified service technician, if needed. Only identical spare parts
may be used. This ensures that the safety of the power tool is maintained.
SAFETY INSTRUCTIONS FOR CORDLESS SCREWDRIVERS
- Hold power tools only by insulated gripping surfaces, when performing an operation where the tool
or the screw you may encounter is hidden on hidden power lines. Contact with live power lines can
also energize metal parts of the tool and cause electric shock.
- Use suitable devices to find hidden power lines and pipes to avoid drilling them, or contact your
local power company. Contact with a live electrical conductor may cause a fire or result in electric
shock. Damage to the gas line can result in an explosion. Penetration into the water pipe will cause
property damage.