Renkforce 1491363 Bedienungsanleitung Seite 2

Operating instructions
4800 dpi backlit gaming mouse X2
Item no. 1491363
Intended use
Featuring 6 buttons, a scroll wheel and an easily adjustable sensitivity, this mouse is ideal for
gaming as well as normal computer operations.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuits or fire. Read the instructions
carefully and keep them. Make this product available to third parties only together with its
operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Mouse
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
above. Follow the instructions on the website.
Explanation of symbols
The symbol with the exclamation mark in the triangle is used to highlight important
information in these operating instructions. Always read this information carefully.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about the operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
• Ensure that the cable does not present a trip hazard.
Operation
a) Connection and setup
• Place the mouse on a smooth, flat surface of a sufficient size.
• The mouse's optical motion sensor may not work on some surfaces.
- No movement will be detected when the mouse is used on reflective surfaces or glass.
- If the cursor does not move, try placing the mouse on a suitable mouse pad.
- Please note that the mouse may leave marks on delicate surfaces.
• Connect the USB plug on the mouse to a USB port on your computer. The mouse light will
turn on.
• The operating system will recognise the mouse as new hardware and install the necessary
drivers (these are included with the operating system).
b) Buttons and scroll wheel
Button
Left button
Right button
Scroll wheel with button
Sensitivity button
(on top of mouse)
Forwards and backwards buttons
(on the side of the mouse)
c) System-dependent settings
Open the mouse configuration menu on your operating system. Depending on your operating
system, you can configure additional settings such as the scroll wheel function.
Care and cleaning
• Disconnect the product from the computer before cleaning.
• Do not immerse the product in water.
• If the cursor doesn't move properly after you have used the mouse for a long period of time,
check whether the sensor on the bottom of the mouse is dirty.
If so, blow briefly on the sensor or clean it with a soft, clean brush.
• Use a dry, lint-free cloth to clean the product.
• Do not use any abrasive or chemical cleaning agents.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage/current ..................... 5 V/DC, 500 mA via USB
USB .............................................. USB 2.0 and above
Sensitivity settings ........................ 600 / 1200 / 2400 / 4800 dpi
Motion detector ............................. Optical sensor
Cable length ................................. 175 cm
System requirements .................... Windows
Vista (32/64-bit), 7 (32/64-bit), 8 (32/64-bit),
8.1 (32/64-bit), 10 (32/64-bit), RT;
Mac OSX 10.4 or later;
Linux Kernel 2.4 or later
Operating conditions ..................... -10 to + 50 °C, 10 – 85 % RH (non-condensing)
Storage conditions ........................ -20 to +60 °C, 10 – 95 % RH (non-condensing)
Dimensions (W x H x D) ............... 76 x 40 x 125 mm
Weight .......................................... 144 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
Command
Select, click; configure on operating system
Open menu; configure on operating system
Scroll; configure on operating system
Sensitivity settings:
600 – 1200 – 2400 – 4800 dpi
Go forwards or backwards, e.g. in a web browser
XP (with SP1, SP2, SP3) (32-bit),
®
*1491363_v1_0816_02_jh_m_4L_(2)